Encontrei algumas informações sobre isso:
O que é isso exatamente?
MS Polymer™ is a water- and solvent-free, clear, odourless solution
and liquid at room temperature. It has low volatility and a low Tg.
When it comes into contact with a catalyst and water, a crosslinked
matrix is formed, providing good heat and chemical resistance.
MS Polymer stands for “modified silicone”, although it is not entirely
silicone-based. It has a polyether backbone with reactive silyl
functionality (telechelic).There are 2 kinds: a dimethoxysilyl (DMS)
with 2 reactive groups (each side) on it and a trimethoxysilyl (TMS)
with 3 reactive groups on it, making it a faster curing system than
the DMS type. The TMS polymer is a newer version which creates a more
strongly crosslinked matrix during curing in order to make harder and
stronger material.
The biggest difference with products common in the PSA and tapes world
is that crosslinking occurs through moisture-curing. So by addition of
a catalyst and subsequent contact with water, MS Polymer™ will start
crosslinking and form a matrix structure. Besides the functionality,
which can be altered by using either DMS or more reactive TMS, the
polyether backbone can also be tuned by varying molecular-weight and
branching. The polymer is telechelic, having 2 ends, but also a
single-end version can be used as a kind of plasticiser. The product
range includes a high-strength grade, meaning that the functional
groups are even denser, creating even harder or higher-strength
material. A mixture of polymers can be used to make many different
kinds of products.
O que você pode fazer com isso?
Isso adiciona outra aventura à lista acima:
MS Polymer™ is mainly utilised in the adhesives and sealants world
where it is a more common technology. (In contrast, silicone is not
actually an adhesive, its adhesive qualities tend to break down much
sooner than those of an actual adhesive *.) Its applications
include sealants and adhesives for construction, automotive and DIY,
such as waterproofing, glazing and insulating.
The polymer is also fairly to very compatible with many rubbers,
acrylics, resins and additives. In other words, it is very compatible
with many components currently used in PSAs to make a tape.
Algumas questões importantes permanecem:
fonte
Se não fosse mais caro que o silicone, eu pessoalmente o usaria, pois é muito melhor usá-lo.