How do I know who's connected to my Wi-Fi?

View devices connected to your network and review data usage

1. Open the Google Home app .
2. Tap Wi-Fi .
3. At the top, tap Devices.
4. Tap a specific device and a tab to find additional details. Speed: Real time usage is how much data your device is currently using.

Consulte Mais informação

What is this SSID?

The SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. This is viewable to anyone with a wireless device within reachable distance of your network. It's recommended you set up a password so not just anybody can connect to your network. Why is there a hidden network on my Wi-Fi? What Is a Hidden Network Used For? People use a hidden network to keep things slightly more secure. While tools are available to detect these networks, the average user won't think to look for something they don't even know exists. Some users also set up hidden networks to keep things tidier when browsing new networks.

What is CMU MIMO?

CMU-MIMO. An advancement of MU-MIMO in development is Coordinated or Clustered Multiuser MIMO (CMU-MIMO). Through CMU-MIMO, Wi-Fi will run through multiple network access points, allowing a spread throughout an area for device connectivity without loss of efficiency or bandwidth. What is the maximum speed of 802.11 b?

Protocol	Frequency	Maximum data rate (theoretical)
802.11g	2.4 GHz	54 Mbps
802.11a	5 GHz	54 Mbps
802.11b	2.4 GHz	11 Mbps
Legacy 802.11	2.4 GHz	2 Mbps

Which Wi-Fi mode is best?

If you want maximum throughput and minimal interference, channels 1, 6, and 11 are your best choices. But depending on other wireless networks in your vicinity, one of those channels might be a better option than the others. How do I change my WIFI to AES? In Windows Vista and 7, bring up the list of available wireless networks, right-click the network, and select Properties. Then change Security Type to WPA2-Personal, Encryption Type to AES, and enter the passphrase as the Network Security Key.

How do I enable TKIP?

Procedures on configuring WPA2-TKIP (PSK) as follows:

1. Select the 'Start' button.
2. Select 'Program\WLAN SWC.
3. Select the 'Config' tab.
4. Select the 'New' button.
5. Enter a 'Profile Name'.
6. Enter the 'SSID'.
7. Open the 'Assoc Mode' drop down list and select 'WPA2-Personal (PSK)'.

Does AirPort extreme use AES? If you have an AirPort Extreme wireless router, it is already set to use AES by default..... unless you have manually changed the wireless security settings on the device.

What is the purpose of TKIP?

Temporal Key Integrity Protocol (TKIP /tiːˈkɪp/) is a security protocol used in the IEEE 802.11 wireless networking standard. TKIP was designed by the IEEE 802.11i task group and the Wi-Fi Alliance as an interim solution to replace WEP without requiring the replacement of legacy hardware.